This 2-piece door sill kit from the M Performance catalogue offers a seamless replacement for standard sills on BMW 235i, 240i, M2, and M2C models. These sills are enhanced with a carbon finish and adorned with the M Performance logo, capturing the essence of Motorsport style!Designed for direct ..

Designed specifically for 1.6T engines in the Ford Fiesta MK7 ST 180, this upstream (pre-catalyst) oxygen sensor addresses the frequent P0420 error stemming from sensor damage.Seamless bolt-on fitting Located upstream (before the catalyst) Equipped with a 5-wire connector..

The Pressure Control Valve (PCV) is an essential component in the 2.0 TFSI EA88.3 engines found in models such as the Golf 7 GTI, Golf 7 R, TT Mk3, Leon 3 Cupra, and S3 8V. A malfunctioning PCV can lead to several issues including excessive oil consumption, reduced power, unstable idle, and misfires..

This Audi R8 coolant cap serves as an ideal substitute for the standard OEM cap found on most VAG group engines equipped with the classic blue plastic cap, including the 1.8T 20V, 2.0 TFSI, 3.2 FSI, and 4.2 FSI engines. It boasts a modern silver and black finish that enhances the engine bay with a s..

Enhance your BMW's appearance with these sleek black aluminum door locking pins that display the M Performance logo. These pins serve as a straightforward swap for the original ones found on any BMW model that features vertical pins in either the front or rear doors.Designed for direct mounting, ..

This stylish oil cap, inspired by the Audi R8 design, serves as an ideal substitute for the standard plastic oil cap found on various VAG group engines, including the 1.8T 20V, 2.0 TFSI, 3.2 FSI, and 4.2 FSI (refer to images). It showcases an attractive silver and black finish that enhances the aest..

This original equipment manufacturer expansion tank is specifically designed for compatibility with the Audi S4 B5, RS4 B5, and RS6 C5 models, perfect for replacing an old or damaged tank.Designed for direct mounting to ensure easy installation Genuine OEM product guarantees reliable performance ..

This 4 bar MAP sensor serves as a perfect substitute for the standard 2.5 or 3 bar sensors, designed specifically for those looking to accurately and dependably tune their 2.0 TFSI, 2.5 TFSI, 3.0 TFSI, or 4.0 TFSI engines to handle high boost pressures and large turbochargers.Available for indivi..

This exhaust manifold gasket is engineered specifically for the 1.6T engines of the Ford Fiesta MK7 ST 180. It is essential to replace this gasket whenever the manifold is removed, as it is designed to withstand high temperatures.Designed for direct bolt-on installation Authentic Ford product Con..

This breather tube is specifically crafted to connect the PCV plate to the turbo inlet elbow on 2.0 TFSI EA888.3 engines, compatible with VAG MQB models including the S3 8V, Golf 7 R, Polo GTI, Ibiza 6P Cupra, and Audi S1 that feature the 1.8 / 2.0 EA888.3 engine. This tube facilitates the straightf..

Inspired by OEM Audi equipment, this ignition coil wiring harness cover offers a cost-effective and stylish upgrade for your 2.0 TFSI EA113 / EA888.1/2 or 1.8T 20V engine. Choose between a vibrant red or bold blue finish. The cover is crafted from durable Polyethylene and is designed to fit most eng..

This valve cover gasket set serves as an exact substitute for the factory gaskets in the 3.2 V6 engines found in models such as the Golf 4 R32, Golf 5 R32, A3 8P 3.2 FSI, and TT 8J V6. It's crucial to replace these gaskets every time the valve cover is removed and to check them at every oil change o..

The Pressure Control Valve (PCV) is an essential component used in the 2.0 TFSI EA113 engines found in models like the Golf 5 GTI, Golf 6 R, TT Mk2, Leon 2 Cupra, and S3 8P. Its primary function is to channel the gases accumulated in the crankcase back into the engine through the intake manifold. Sy..

For 4.2 FSI engines, it is imperative to use designated gaskets that provide an effective seal between the intake manifold and the engine. Each time the intake manifold is detached, these gaskets should be replaced due to their exposure to hydrocarbons.Installation is a direct bolt-on process Ava..

This valve cover gasket set serves as an ideal substitute for the original gaskets fitted in the N54 engines of BMW 135i E8x and 335i E9x series. It is crucial to install new gaskets with every valve cover removal or to inspect them visually at each oil change or spark plug replacement due to their ..

This OEM expansion tank is specifically crafted for compatibility with Golf 4, S3 8L, TT 8N, and Leon 1M models, serving as an ideal substitute for worn-out or faulty tanks.Designed for direct mounting to facilitate straightforward installation Genuine OEM product ensures dependable performance S..

This OEM expansion tank, supplied with a cap, is suitable for replacement in Golf 5, Golf 6, Leon 2, TT Mk2, and A3 8P models to substitute a worn or faulty tank.Designed for straightforward mounting and easy installation Genuine OEM product ensures dependable performance Accommodates all fl..

This downpipe hanger mount is an authentic Audi component, specifically crafted for direct replacement in 2.0 TFSI EA113 and 2.0 TSI EA888.1 engines.Designed for direct mounting to ensure easy installation Genuine Audi product to ensure premium quality..

The gasket for the intake manifold, compatible with 2.0 TFSI EA113 and 2.0 TSI EA888.1 engines in models like Golf 5 or 6 GTI / R, Leon 2 Cupra, and S3 8P, ensures a secure seal between the manifold and engine. It's crucial to replace this gasket each time the manifold is detached, as it is exposed ..

The intake manifold gasket for the Nissan 370Z and 350Z VQ37 and VQ35HR engines is designed to provide an optimal seal between the manifold's lower section and the engine block. It is essential to replace this gasket whenever the intake manifold is detached, as it is exposed to hydrocarbons.Seaml..